More Than a Quick Fix
A broken-down truck means lost time and disrupted schedules. When we took on a Kylertown truck transmission repair for a 2016 Mack CXU, the engine started but the truck wouldn’t move. We knew immediately that this kind of issue calls for a solid plan, accurate diagnostics, and experienced hands. What came next was a full teardown, detailed inspection, and complete rebuild from the inside out.
Tackling Transmission Trouble
We arrived on-site and found the Mack’s engine started, but the vehicle stayed put. That told us the drivetrain had a deeper issue. We brought the unit back to the garage with the jockey truck for inspection.
The first clue came when we drained the transmission fluid. Metal fragments appeared in the pan, pointing to serious internal damage. To cover all bases, we ran a full scan with our diagnostic tools before moving forward. Once we had a better picture, we got to work removing the damaged components.
Taking It Apart and Putting It Back Together
The repair began with transmission removal. We also took out the clutch, flywheel, and rear main seal. The flywheel was resurfaced off-site and returned for reinstallation. After replacing all damaged and worn parts, we began reassembly.
Here’s the step-by-step breakdown of this Kylertown truck transmission repair process:
- Removed the transmission, clutch, and flywheel
- Replaced the rear main seal
- Resurfaced and reinstalled the flywheel
- Installed the new clutch
- Swapped the lid from the old transmission
- Replaced coolant lines and clutch actuator
- Reinstalled the transmission and added fluid
- Programmed the new actuator
- Reinstalled the drive shafts
During the final steps, we found a seal had been missed. We removed the transmission again, corrected the error, and completed the repair. This second removal added a little bit of time, but it prevented a future failure.
Final Test Drive: No Surprises
After reassembly, we let the truck idle and monitored performance. Everything looked good. A test drive confirmed proper function with no warning lights or unusual noises. The Mack CXU was back in working order.
Fluid checks, regular inspections, and careful driving help avoid transmission failure. Damage often builds over time, so early detection is key.
Bigler Boyz Truck & Trailer Repair: Kylertown Truck Transmission Repair Done Right
At Bigler Boyz Truck & Trailer Repair, we take Kylertown truck transmission repair seriously. When Penta Inc’s 2016 Mack CXU had a suspected transmission failure, they brought it to us. Our team carried out diagnostics, disassembled the damaged parts, and completed a full transmission service.
We never rush Kylertown truck transmission repair jobs. We focus on careful inspections, clear repairs, and thorough testing. Here’s what goes into every Kylertown truck transmission repair we perform:
- Full system diagnostics before starting repairs
- Clear communication and approved estimates
- Skilled removal and installation of key drivetrain components
- Testing and adjustments after reassembly
If your transmission is acting up, we’ll find the problem and fix it. Every Kylertown truck transmission repair starts with the right crew, and we’re here when you need us.
FAQ
How can I tell if my truck’s transmission is failing?
Look for signs like delayed gear shifts, slipping while driving, strange noises during acceleration, or leaking fluid. A burning smell can also point to overheating or internal wear.
What causes metal shavings in transmission fluid?
Metal shavings usually come from worn gears, bearings, or clutches inside the transmission. They often signal internal damage that needs professional repair.
Is it safe to keep driving if the truck still starts but won’t move?
No, it’s not safe. If the engine runs but the vehicle doesn’t move, it could lead to further damage. Tow it to a shop as soon as possible.
Why would a transmission need to be removed more than once during a repair?
Sometimes a missed seal or overlooked part needs correction after the first installation. Removing the transmission again ensures the repair is complete and reliable.
Do resurfaced flywheels last as long as new ones?
A properly resurfaced flywheel can perform just as well as a new one. The key is making sure it’s resurfaced by a qualified shop and installed correctly.
How long does a full transmission repair usually take?
It depends on parts availability and the extent of the damage. A standard rebuild and reinstall can take anywhere from two days to a full week.
